Chain link fence hardware for the gates that get used every day.
Chain link gates carry daily traffic — and cheap hinges are why they sag, drag and fail. We supply bolt-on and self-closing hinges sized to standard North American fence posts, plus the latches and bolts that finish the job.
Gate hardware as a product family — hinges, latches and complete kits.
Every item ships as a matched set with screws and a hex wrench: the hinge, the latch, the bolts — sized to your gate and post, not a generic catalogue part.
Chain link gate hinges
Bolt-on strap hinges for standard round posts — 1-3/8″ to 2-7/8″ OD — sold in matched pairs, each with a threaded adjustment pin and mounting plate.
- Strap 120 mm (4.72″) × 2 mm, φ6.8 mm pin — galvanized available
- Self-tapping screws and hex wrench included, no welding
- Threaded pin adjusts gate clearance and swing
Buyers ask: post OD, gate weight, swing direction — send a photo if unsure.
Heavy-duty adjustable hinges
Extra-thick strap with an exposed adjustment screw and lock nut — for commercial and driveway gates that see daily traffic.
- Reinforced strap, multiple bolt positions
- Adjustment screw sets gate gap and swing
- Rated to 300 lb, for 2-3/8″ and 2-7/8″ posts
Buyers ask: gate width and weight, daily cycle count, corrosion environment.
White powder-coated hinges
White finish matched to PVC and vinyl fence gates — with clamping adjustment, and self-closing spring models for pool and safety gates.
- Weather-resistant white powder coat
- Clamping adjustment for clean alignment
- Self-closing options available
Buyers ask: needed reach, bracket pattern, bolt type (carriage vs self-tapper).
Adjustable hinge arms & brackets
Replacement arms and mounting brackets for gates that hang off-square — adjustable reach, straight or cranked profile.
- Adjustable reach to 110 mm (4.33″), 2 mm steel
- Mounts with carriage bolts or self-tappers
- Pairs with our hinge sets
Gate hasp latches
Short, long and capped hasp latches in powder-coated steel — the finishing lock for wood, vinyl and chain link gates.
- Short (34 mm) and long (144 mm) bodies
- Padlock-ready capped option, M4 × 26.5 mm
- Screws included, matte black finish
Buyers ask: body length to match the gate stile, padlock vs hasp use.
Complete gate hardware kits
Top and bottom hinges plus latch, bolts, wrench and a fitting card, matched by gate size — residential to industrial.
- Residential kit — gates to 150 lb
- Commercial kit — gates to 300 lb
- OEM: custom finishes and private label
The hinge is the smallest part of your fence and the only one used every single day — which is why cheap ones fail first. We rate ours to the gate weight they actually carry. Send the gate type and weight, and you get the matched set and the drawing back with the quote.
Match the hinge to your post — size, load and finish.
| Post size (OD) | Recommended hinge | Rated gate load | Typical use |
|---|---|---|---|
| 1-3/8″ | Bolt-on gate hinge | up to 100 lb | Residential yard gates |
| 1-5/8″ / 1-7/8″ | Bolt-on or clamp-on hinge | up to 120 lb | Standard chain link gates |
| 2-3/8″ | Heavy bolt-on, double bolt | up to 150 lb | Commercial & driveway gates |
| 2-7/8″ | Extra-heavy clamp-on | up to 200 lb | Industrial & farm gates |
Small hardware, checked like it matters — because it does.
Sized to North American posts
1-3/8″ through 2-7/8″ — the standard chain link post sizes U.S. and Canadian installers use.
Corrosion-resistant finishes
Hot-dip galvanized and stainless grades that hold up in wet and coastal conditions.
Fit information with every quote
Drawings and dimensions upfront, so your team can confirm fit before ordering.
Built for distributors
Samples, mixed sizes per carton, private label and container programs sized to your sell-through.
Built to take a daily push, pull and slam.
Every hinge ships as a matched top-and-bottom pair with the screws and hex wrench you need. Tell us your post size and gate weight — we’ll match the set and send the drawing with your quote.
Beyond the gate: T-post clips and fence hardware.
The same buyers who replace gate hardware also maintain woven-wire and field fence — and the clips that hold it to T-posts. Same galvanizing, same packing discipline, one more reorder line.
T-post clips — bulk packs
Galvanized spring clips that hold woven wire and field fence to standard T-posts, sold in 50 and 100-piece packs — the way fence crews actually buy them.
- 50 & 100-piece packs, bagged or boxed
- Hot-dip galvanized; stainless available
- Fits standard 1.25–2 lb/ft farm T-posts